Expert Answers about Keystone Big Sky Fifth Wheel

• Recommended Trailer Hitch Receiver for a 2015 Keystone Montana Fifth Wheel Trailer
• For your 2015 Keystone Montana Fifth Wheel, I highly recommend the Curt Adjustable Trailer Hitch Receiver part # C13701. This is one of the most universal trailer hitches we offer with a Class III rating and 2" receiver tube opening. As long as the width of your frame from the outside of each rails does not exceed 51" then this hitch will work great for you. It can either be welded or bolted into place though we do recommend a professional welder should you choose that option. I have...
  view full answer...


• Does Titan Disc Brake Kit And Actuator Come With Oil Bath Or Grease Hubs
• The Titan Disc Brake Kit and BrakeRite Electric-Hydraulic Actuator part # T4843800 comes with Titan Disc Brakes that come with bearing protectors. The bearings still need to be greased with bearing grease like part # L11465 however the bearing protectors have a grease fitting to make it easier to grease the bearings. If all the bearings match up to your current oil bath hub then you shouldn't have an issue with the Titan Disc Brake Kit part # T4843800. You do want to make sure to wipe...
  view full answer...


• Replacement Landing Gear for 2010 Keystone Fuzion FZ322 Fifth Wheel Trailer
• There is a way for you to determine the correct replacement landing gear for your 2010 Keystone Fuzion, though we do not have landing gear made specifically for your trailer. Instead, you will need to measure the mounting brackets on your trailer from outside to outside like in the attached diagram and choose the amount of lift and weight capacity that will work for you. For example, you may be able to use the Landing Gear # RVLG-8HDL, which has an 8,000 lb capacity, offers 20-1/2" of...
  view full answer...


• Will the E-Z Flex Heavy Duty Rubber Suspension System Fit a 2015 Keystone Montana 3720RL
• As long as your 2015 Keystone Montana 3720RL uses double eye leaf springs and has an axle spacing that is listed below then the E-Z Flex Heavy Duty Rubber Suspension System will work for you. In order to determine which one will work for you, you will need to measure the distance on center between your axles. If the distance between the two axles is 33" on center then you will want to use part # K71-652-00 but if this distance is 35" then you will want to use part # K71-653-00. If this...
  view full answer...